linux problems with desktop GUI
An Error I Get When I Changed The Resolution On My Desktop In Fedora Using Kde [1299], Last Updated: Mon Jun 24, 2024
Stalnli
Fri Nov 13, 2009
2 Comments
682 Visits
im getting this error on my fedora system:
The display server has been shut down about 6 times in the last 90 seconds. It is likely that something bad is going on. Waiting for 2 minutes before trying again on display: 0.
UPDATE:
ok, this is what i did, i went to Start > Settings > Display
then in the hardware tab, i clicked on configured button, the selected:
Generic LCD Display:
LCD Panel 1024x768
so thats when i got this message:
Display settings changed
You need to log out and restart the X server for the changes to take affect.
Configuration was written to /etc/X11/xorg.conf, original configuration saved as /etc/X11/xorg.conf.backup
so if after you have made changes to your display and when you reboot you can't see anything, try login in as single mode and replace the configuration file with the original
The display server has been shut down about 6 times in the last 90 seconds. It is likely that something bad is going on. Waiting for 2 minutes before trying again on display: 0.
UPDATE:
ok, this is what i did, i went to Start > Settings > Display
then in the hardware tab, i clicked on configured button, the selected:
Generic LCD Display:
LCD Panel 1024x768
so thats when i got this message:
Display settings changed
You need to log out and restart the X server for the changes to take affect.
Configuration was written to /etc/X11/xorg.conf, original configuration saved as /etc/X11/xorg.conf.backup
so if after you have made changes to your display and when you reboot you can't see anything, try login in as single mode and replace the configuration file with the original
chito
Fri Nov 13, 2009
well, im screwed because i dont have a xorg.conf.backup file
wamin
Sat Nov 14, 2009
this is how my xorg.conf file looks like:
# xorg configuration created by pyxf86config
section "serverlayout"
identifier "default layout"
screen 0 "screen0" 0 0
inputdevice "keyboard0" "corekeyboard"
endsection
section "inputdevice"
identifier "keyboard0"
driver "kbd"
option "xkbmodel" "pc105"
option "xkblayout" "us"
endsection
section "device"
identifier "videocard0"
driver "vesa"
endsection
section "screen"
identifier "screen0"
device "videocard0"
defaultdepth 24
subsection "display"
viewport 0 0
depth 24
endsubsection
endsection